Tagged: Hitachi Oscilloscopes Toggle Comment Threads | Keyboard Shortcuts

  • schoolie 2:10 pm on February 14, 2013 Permalink | Reply
    Tags: , Hitachi Oscilloscopes, Hitachi V-152F Manual   

    Hitachi V-152F Oscilloscope Operation Manual 

    I had someone ask for a copy of the manual, so here it is:

    Click for the Full PDF


    • Robert 4:39 pm on July 7, 2013 Permalink | Reply

      thank you very much…I have this old , (maybe 40 years)V152 with both traces at the bottom of the screen, and it looks a power supply problem. and the vertical amp ..I have ben looking for info, a schematic that you published..For some reason I cannot print the file, but that’s another issue,

      • schoolie 10:27 am on July 8, 2013 Permalink | Reply

        Glad it’s been helpful. You should be able to download the PDF and print from there, I’m not sure why that wouldn’t be working. Let me know if you can’t get it working, and I’ll see if I can find the original scanned image. I’d love to hear if you can get your scope working also! -Brian

  • schoolie 5:43 pm on February 13, 2013 Permalink | Reply
    Tags: , , , Hitachi Oscilloscopes,   

    Getting acquainted with our new (old) Hitachi Oscilloscopes 

    With the goal of expanding our electronics tinkering/troubleshooting capabilities, I’ve had my eye out for a cheap oscilloscope on craigslist or eBay. The search paid off a couple months ago when I picked up two old analog Hitachi oscilloscopes, along with a square wave generator and a couple other vintage items.

    The scopes in question are the Hitachi V-152F and V-134, seen below. I haven’t been able to locate any date of manufacture for these things, but they’re completely analog. The 134 even has an analog storage function, which is pretty cool.

    Hitach V-134 (top) and V-152F (bottom)

    (Read the rest of this post…)

    • Greg Leeming 8:43 pm on November 3, 2015 Permalink | Reply

      Hi, noticed you have Hitachi V-134 scope – have you located a users manual for it?

      Just purchased the scope

      Am also building MC-2100 based controller for my lathe – really appreciate your posts – have been really helpful


      • schoolie 9:50 pm on November 3, 2015 Permalink | Reply

        I haven’t found a manual for the V-134. It’s pretty similar to the 152, with the exception of the trace storage function. I might be able to help you out if you’re trying to do anything in particular. Good luck!

    • J 7:33 pm on April 25, 2017 Permalink | Reply

      I’m also looking for the manual since I just got two V134’s. I cleaned the contacts before watching the video and it works great just like yours. I’m mainly looking for documentation on calibration, which I bet I could figure out but the manual would be nice for doing so.

Compose new post
Next post/Next comment
Previous post/Previous comment
Show/Hide comments
Go to top
Go to login
Show/Hide help
shift + esc